| TEMPER
DESIGNATION |
| Classification |
Target Rockwell Hardness T scale
HR 30T |
Steel Type |
APPLICATION |
| T-1 |
49 กพ 3 |
L,M,D |
It has deep drawing, non-aging and mini-earing
properties and is used in deep drawing with ultra superior
ductility, found in aerosel tops, food can tops, and
gas container bodies.
|
| T-2 |
53 กพ 3 |
L,MR,D |
It is excellent in ductility and has drawing,
non-aging and mini-earing properties and is used in rings,
plugs, pail cans and D&I cans. |
| T-2.5 |
55 กพ 3 |
L,MR,D |
It has similar properties to shoes of T2
and is used for battery bodies, small tube bodies of general
tubes for light working. |
| T-3 |
57 กพ 3 |
L,MR,D |
It has a fine surface and superior formability
and is used in the lids and bodies of general cans for
light working. |
| T-4 |
61 กพ 3 |
L,MR,D |
It is high strength and is used in carbonate
beverage cans that require strength. |
| T-5 |
65 กพ 3 |
L,MR |
t has superior cold rolling strength and
can be used as a substitute for T4 type of plate for the
purpose of lowering the gauge. |
| DESIGNATION
OF STEEL TYPE |
| D |
This is Al-killed steel and is used in deep drawing
or drawing which is susceptible to stretcher strain. |
| L |
This has an extremely small amount of such residual
elements as Cu, Ni and Mo and is used in container material
with an excellent corrosion resistance against certain
food stuffs. |
| MR |
This has a small amount of residual elements and is
used in general application including container material
with superior corrosion resistance. |
| PRODUCT
RANGE |
| Thickness (mm) |
0.20 ~ 0.60 |
| Width (mm) |
600 ~ 1070 |
| Coil Weight (MT) |
|
| Coil Inner Dia. (mm) |
508 |
Specification for other application of Black Plate is
available by contacting Moriah Co. Ltd
for further information and / or your specified requirement.
|
 |
Superb
weldability