 |
 |
 |
| |
| COMMERCIAL
QUALITY |
This is used for slight forming such as as-flat roll
forming or bending and available Pure-Zn, Zn-Fe, Zn-Ni
and Terne.
| Pure-Zn |
|
| Characteristics : |
Paintability (Phosphate-treated)
Corrosion Resistance (chromate-treated)
Anti-Fingerprint (anti-finger-treated) |
| Application : |
Inner & outer panels of home appliance
Substrates for painting
Inner & outer materials of construction &
metal furniture |
| Zn-Fe |
|
| Characteristics : |
Corrosion Resistance after painting
Spot weldability
Paintability (Phosphate-treated) |
| Application : |
Inner & outer panels of automobiles
Door outer
Hood
Fender |
| Zn-Ni |
|
| Characteristics : |
Corrosion Resistance in outdoor exposure
Weldability
Paintability |
| Application : |
Inner & outer panels of automobiles
Door outer
Hood
Fender |
| Terne Sheet |
|
| Characteristics : |
Gasoline Resistance
Solderability, Spot weldability
Workability
Corrosion Resistance |
| Application : |
Fuel tank of automobile
Radiator support
Radio tuner
TV chassis |
|
| JIS |
SECC |
| ASTM |
A591-CQ |
| DRAWING
QUALITY |
| This is suitable for the parts that require
a drawing fabrication, which mainly used for home appliances
and automobile parts. |
| JIS |
SECD |
| ASTM |
A591-DQ |
| DEEP
DRAWING QUALITY |
| This is suitable for the parts that require
deep drawing fabrication and anti-aging property. |
| JIS |
SECE |
| ASTM |
A591-DQSK |
| EXTRA
DEEP DRAWING QUALITY |
| This is suitable for the parts that require
extremely deep drawing fabrication, which mainly used
for home appliances and automobile parts. |
| STRUCTURAL
QUALITY |
| This has a high strength property and is
used for structural or stiffening materials. Pure-Zn,
Zn-Fe, Zn-Ni coatings are available. |
| HIGH
STRENGTH QUALITY |
| This is used for parts that require both
formability and strength. Recently the application is
expanded to the automobile panels in view of weight reduction
for the improvement of fuel economy and safety. |
Specification for other application of Electro Galvanized Steel
is available by contacting Moriah Co. Ltd for further information
and / or your specified requirement.
| PRODUCT
RANGE (COMMERCIAL QUALITY) |
| Thickness (mm) |
0.40  T < 1.0 & 1.0 T
(subject to prior negotiation : some dimensions are not
available ) |
| Width (mm) |
610 W 1524 & 1524 < W
(subject to prior negotiation : some dimensions are not
available ) |
| Length (mm) |
1219 L 4572
(subject to prior negotiation : some dimensions are not
available ) |
| Chemical Treatment |
Oiled
Chromated
Phosphated
Anti-Finger |
|
 |
|
|
